Brass Handle

1. Gather Tools & Prep

You’ll need: Tape measure, pencil, screwdriver (included with handles), masking tape. Clean the installation area to remove dust – avoid abrasive cleaners on brass.

2. Mark Hole Positions

For new cabinets: Use the handle’s hole spacing (64/96/128/160mm standard) to mark points with a pencil. For replacements: Align with existing holes. Apply masking tape over marks to prevent wood splintering.

3. Drill (If Needed)

Use a 3mm drill bit to make holes (drill slowly for precision). Skip if reusing old holes – ensure they match the handle’s spacing.

4. Attach the Handle

Insert screws through the handle’s backplate into the holes. Tighten gently with a screwdriver – don’t over-tighten (avoids damaging brass or wood). Ensure the handle is level (use a small level if needed).

5. Final Check

Test the handle by opening/closing 5-10 times – it should feel secure, no wobbling. Wipe the brass with a soft cloth to remove fingerprints.

Pro Tip: For recessed Neo-Chinese handles, follow the supplier’s template to ensure flush installation. Enjoy your durable, stylish brass hardware!

#BrassHandleInstallation #DIYHardware #NeoChineseDecor #SolidBrassTips

5 Simple Steps to Install Brass Handles – No Professional Tools Needed

分享至微信分享

分享至微信